Flexible design and manufacturing strategy matches material to application, utilizing the latest and most advanced technologies. EPDM Compound High Underhood Temperatures Resists Ozone Contamination Less Slippage Runs Cooler Aramid Reinforcement  

Steril-Aire's Double-Ended fixtures are ideal for internal installation in medium to large air handling systems in commercial, industrial, health care and institutional buildings.   Model DE fixtures may be mounted singly, in built-up banks or in parallel configurations in a variety of locations, including coils, drain pans, ductwork, mixed air plenums and exhaust systems. DE Fixtures may also be ceiling or wall-mounted for specialty applications in health care and food processing.   The DE Series is available in six lengths (18", 24", 30", 36", 42" and 62"), 110-277 V, 50/60 Hz, providing installation flexibility to accommodate virtually any system.

Steril-Aire's Single-Ended Emitters are ideal for external mount in fan coils, heat pumps, unit ventilators, terminal units and ductwork. Steril-Aire Single-Ended (SE Series) fixtures install from the exterior of HVAC equipment, making them ideal for difficult to access sites. These germicidal lamps are easily installed with a one-inch hole in the equipment wall and/or duct, and then simply mounting the fixture to the unit exterior. Only the lamp or tube penetrates into the system, while the power supply remains external. The SE Series is available in seven lengths — 12", 16", 20", 24", 30", 36" and 42" — with a 120-277 V, 50/60 Hz universal power supply.

Steril-Aire's Single-Ended, NEMA 4X Emitters are ideal for exterior units, including rooftop units, AHUs, heat pumps, fan coils, packaged terminal units and ducts. Steril-Aire Single-Ended NEMA 4X (SEN Series) fixtures combine the externally mounted design of the SE Series with a weather resistant NEMA 4X fixture. Installed from the exterior of rooftop A/C units or ductwork, they are ideal for difficult to access outdoor sites. By creating two 1" holes in the equipment wall and mounting the fixture, the devices may be installed vertically or horizontally. Only the lamp or tube penetrates into the system, while the power supply remains external. The SEN Series is available in seven lengths — 12", 16", 20", 24", 30", 36" and 42" — with a 120-277 V, 50/60 Hz universal power supply.

The Glasfloss line of Quad and Cube filters offers medium efficiency in a wide range of applications. The rigid, self-seal design of these filters helps prevent air bypass and allows the filters to operate under adverse conditions, especially where high humidity is present. The Quad filter features a two-staged 100%, non-woven polyester media for maximum efficiency and service life. The Cube filter features the same two-stage media as the Quad filter and is available in regular, internal supported and unitized construction. Versatile, Self-seal Design Heavy-duty Construction High Moisture Resistance and Durability

SteriLight UVC Emitters are designed for residential and light commercial applications. The SteriLight Model RSE I (top) is designed for "N" style, "W" style, slab and counter-flow "A" coils. The single UVC Emitter is easily installed with a one-inch hole in the coil box, attaching the fixture with self-tapping screws, and wiring as required (soft or hard wired). The SteriLight Model RSE II (bottom) is ideal for conventional "A" style coils, slabs and slants up to 5 tons. The double-UVC Emitter installs easily, similar to the RSE I. The RSE I and RSE II Series are available in three Emitter lengths — 16", 20" and 24". The RSE I and RSE II have a 120-277 V, 50/60 Hz universal power supply. The RSE II also has a choice of configurations: 10" or 14" centerlines

The SterilWand packages Steril-Aire's multi-patented UVC technology in a versatile, hand-held device designed for decontamination of surfaces to eliminate mold, bacteria or viruses. The SterilWand may be used in any type of residential, commercial, industrial or institutional building to provide a fast-acting, portable method of decontaminating tabletops, walls and other surfaces. SterilWand devices are suitable for a variety of specialized uses: Residential and commercial mold remediation (as a supplement to other control strategies) Food preparation, processing, yeast rooms, etc. to reduce contamination Laboratories and cleanrooms to prevent cross-contamination Surface decontamination Libraries, to eradicate mold on book surfaces

The UVC Watch Dog monitors operational status of Steril-Aire germicidal UVC Emitter™ installations. It is designed to measure change in electrical current to the Emitters and provide status information with visible LED lights on the mounted Display Unit and/or remote status relayed to a building management system (BMS).